Beginner's Guide to Charging Your Electric Vehicle on Troniq 50

How to start charging my vehicle on Troniq 50

What's happening?

  • You want to start charging your vehicle

What do you need to get started?
  • The charging station is activated
  • A charge card that is active (not applicable for Autostart stations)
What can you do?
  1. Connect your charging cable to both your vehicle and the station
    • If you own a station with a fixed cable, you only have to connect the cable to your vehicle
  2. Swipe your card over the station’s card scanner
    • If you own an Autostart station, the charging session will start without swiping your card
  3. After swiping your card the charging session will start
What happens next?
  • The charging session will end automatically following the vehicle command
  • To end your charging session earlier, swipe your card again over the station’s card scanner
  • If you have any further questions, feel free to reach out for additional support

      • Related Articles

      • How to start charging my vehicle

        What's happening? You want to start charging your vehicle What do you need to get started? Stations used: EVBox BusinessLine EVBox Elvi EVBox HomeLine EVBox Iqon EVBox Livo EVBox PublicLine The charging station is activated A charge card that is ...

      • How to remove a stuck charging cable?

        What's happening? The station doesn’t release the cable Your cable is blocked in the station socket The LED status becomes red after a transaction is terminated What do you need to get started? Access to the fuse box that is connected to the station ...

      • How to read the LED status of a station

        What's happening? You want to understand the LED status of your station What do you need to get started? Stations used: EVBox BusinessLine EVBox HomeLine EVBox PublicLine EVBox Elvi EVBox Iqon What can you do? Make sure the station is powered on ...

      • How to find the article number of the station

        What's happening? The article number is unknown You want to know the product code What do you need to get started? Stations used: EVBox BusinessLine EVBox Elvi EVBox HomeLine EVBox Iqon EVBox Livo EVBox PublicLine EVBox Troniq 50 EVBox Troniq Modular ...

      • How to report an EVBox Elvi with a fixed cable that is not charging

        What's happening? An EVBox Elvi with a fixed cable is not charging The resistance between Communication Pilot (CP) and Proximity Pilot (PE) was 450 ohms on the side of the cable The resistance between Communication Pilot (CP) and Proximity Pilot (PE) ...